6
CLONING KEYS:
PHILIPS® ENCRYPTED CODE
When prompted, insert the original
key into the reader and press
READ button.
Chip type displays with ‘Can
Duplicate’. Leave the original key in
the reader and press WRITE button.
Insert the clonable key (i.e. TK60,
TK100 or GK100 key) into the
reader. Press WRITE button.
Remove the key and proceed to
the Vehicle Ignition Procedure
(Step 2).
INSERT TK60/TK100
PRESS WRITE
C RYP TO P H I L . P H 2 0 ( 4 6 )
CAN DUPLICATE WRITE
STEP 1 COMPLETE
PROCEED TO STEP 2
STEP 1
STEP 2 (VEHICLE IGNITION PROCEDURE)
1) Select the correct horseshoe blade or POD key for the original key and
successfully duplicate/cut the blade.
2) Insert the TK60/TK100/GK100 into
the cut horseshoe blade or POD key.
Take the key to the vehicle and turn in
the vehicle’s ignition to the
‘ON’
position for 5 seconds
, turn to
‘OFF’
then
remove the key from the
ignition for 2 seconds
.
Repeat this step 4 more times.
Summary of Contents for 884 DECRYPTOR ULTEGRA
Page 1: ......
