NDACS 6000 Quick User Guide. 2004 - 2004
C:\projects\ndacs6000\manual\booklet\quickuserguide\quickuserguidenadacs6000.doc
Select
Internet Protocol (TCP/IP)
The
Internet Protocol (TCP/IP) Properties
Window will appear.
Adjust the PC IP address and subnet mask settings to
IP Address:
23.0.0.110
Subnet Mask:
255.0.0.0
Ensure that the
OK
button is selected to confirm the new settings.
5. Web Browser Settings
In order to examine data and configure the NDACS, the Microsoft
Internet Explorer 6.0 web browser should have the following
parameters set.
Start Web Browser.
Tools
? ?
Internet Options
?? ?
Advanced
Internet Explorer 5.0 and 5.5 can be used and should be configured as
above, however on some versions of this software the Service Pack II
must be installed. The service pack for the Microsoft Internet
Explorer is freely available from the Microsoft web site.
6. Using the NDACS
Once the Web Browser is configured and the PC IP address has been
set then it is now possible to examine data and configure the
instrument.
1) Start the Internet Explorer web browser.
2) Enter
23.0.0.100
as the browser address.
The instrument web page will be displayed.
3) Enter default password "
full
" -- lower case
There are 3 levels of password protection for the NDACS but to
allow full configuration of the instrument the default password shown
above must be entered. The passwords can be user set at any time.
4) The main instrument web page will now be displayed.
To observe data -- Select
View Data
button
All of the NDACS analogue inputs are preset to accept input signals
in the range of 0 - 5V.
To read on-line manual -- Select
View Manual
button.
The on-line manual includes comprehensive instructions for all of the
instruments operations.
7. Modem/WAP Enabled Mobile Phone Connection
The NDACS can be directly connected to an external modem or
WAP enabled mobile phone. The modem must be Hayes compatible.
The instrument contains all the software to control the modem or
WAP phone and automatically answers any telephone call.
Connection to the NDACS
Connect a standard 9 pin PC modem cable between the NDACS and
the modem or use the data link cable supplied with a WAP mobile
phone.
Windows 2000/NT Dial-In Account TCP/IP Settings
1) Select Control Panel
?
Network & Dial-Up Connections
2) Select Dial-Up account
3) Select Properties
4) Networking
? ?
Internet Protocol
??
TCP/IP]
5) Select
IP Address Automatically Selected
Tab
Select
DNS Server Address Automatically
Tab
Making a Dial-in connection
1) Dial-up the NDACS using a standard dial-up account from a PC
The dial-up account should have
Username = "
NDACS
" Password = "
NDACS
" -- lower case
The instrument will automatically answer the incoming call and will
indicate that it is negotiating the connection with the PC. The
standard Windows modem icon should appear on the task bar.
Accessing the instrument
1)
Start a web browser and enter the address 195.20.17.50.
This is the default dial-in IP address setting for the NDACS.
2) The Login web page will appear (as shown for network connection
above).
Enter password "
full
" -- lower case.
The main instrument web page will now appear and it will now be
possible to examine data and configure the instrument.
Instrument IP Address
