6
Getting Started
- The Keys Fitness CG2 Elliptical will require some assembly. Unpack the box
in a clear area. Remove packing material. Do not dispose of packing material until assembly
is complete and unit is working properly. Place the unit on a clean level surface for assembly.
Make sure there is easy access to an electrical outlet. Before assembling the unit should be
placed as close as possible to its final location. Tools have been provided for use while assem-
bling this product.
Assembly Parts
1. Owner’s Manual
2. Linkage
3. Left and Right Handlebars
4. Console
5. Console Cable
6. Console Mast
7. Rear Cover
8. M8*50mm Hex Bolt - Qty 3
9. M8*12mm Hex Bolt - Qty 4
10. M8*20mm Hex Bolt - Qty 6
11. M5*12mm Screw - Qty 9
Assembly
Figure 1
Lift pedal and place left Linkage onto
Sleeve and align holes. Secure Linkage to
unit using four M8*12 mm Hex Bolts.
Note:
Left Linkage will be wrapped in plas-
tic. Right Linkage will already be secured
to the sleeve.
LINKAGE
SLEEVE
M8*12MM HEX BOLT