Assembly
10
7. Connect the Sensor Wire (72) and the
Pulse Wires (88) to the Console (9). Then
attach the Console (9) to the top of the
Console Tube (3) and secure it in place
using four Screws (69).
Note: The four Screws (69) will already be
installed into the back of the Console (9)
when you remove it from the box.
Congratulations!
You have completed the assembly of your
new Triumph 5.3e Elliptical.
Figure 7
6.
Insert the
Pulse Wires
(88) into the
large hole at the front of the
Console
Tube
(3) and pull the wires through
the hole at the top of the tube. Secure
the
Pulse Handlebar
(85) to the
Console Tube
(3) using four
Arc
Washers
(34) and four
Hex Head
Bolts
(65).
Figure 6
65
85
88
72
34
9
88
69
72
3
Summary of Contents for Triumph 5.3e
Page 11: ...Exploded View 11 ...