Assembly
9
5.
Slide the
Left Lower Handlebar
(6a)
on to the
Console Tube
(3) and secure it
in place using
Washer
(46),
Nylock Nut
(45), and
Nut Cap
(44). Next, slide the
Left Upper Handlebar
(7a) into the top
of the
Left Lower Handlebar
(6a) and
fasten in place using two
Carriage Bolts
(62), two
Washers
(63), and two
Cap
Nuts
(64). Assemble the
Connecting
Tube
(43) and the
Lower Left Handlebar
(6a) using
Hex Head Bolt
(40),
Washer
(36),
Nylock Nut
(27), and
Nut Cap
(71).
Repeat step to complete the right side.
Step 1:
With the
Tension Knob
(66) on the lowest resistance
setting number 1, insert the ball end of the tension knob
cable into the spring hook on
Tension Cable
(68).
Refer to Picture A for Step 1.
Step 2:
Take the tension knob cable and pull it up and
between the gap of the bracket on the
Tension Cable
(68).
Refer to Picture B for Step 2.
You can raise the tension by turning the
Tension Kno
b (66)
clockwise.
Figure 5
Figure 4a
7a
44
64
45
46
63
62
6a
40
36
27
71 43
6b
7b
68
68
66
66
Summary of Contents for Triumph 5.3e
Page 11: ...Exploded View 11 ...