Keys Fitness Triumph 7.3t, Owner'S Manual

QUICK START / MANUAL MODE

1. Plug into a surge protector outlet. Attach the 

Safety Key

on to the treadmill console.

2. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
3. Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data

can be entered. The TIME window will flash.

4. Press START/STOP button. Belt will begin to move after 4 seconds.  Step on belt slowly after the belt starts

moving. Speed or Incline may be adjusted by using the appro (increase) or – (decrease) button.

5. To end your workout, press START/STOP button.  Belt will gradually slow to zero.
6. To pause your workout, press PAUSE.
7 .To re-start after pausing:  Press the PAUSE button. 

WARNING: THE TREADMILL BELT WILL

RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.

8. Countdown Time, Preset Speed and/or Incline:  Time, Speed, and Incline may be preset prior to getting

started. First, press the POWER button, then press the ENTER button, the time window will blink. Use the
SPEED + or - buttons to select your workout time, then press the ENTER PROGRAM button. The SPEED
window will now be flashing. Using the same UP or DOWN arrows, select the speed for your workout,
then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the I or -
buttons to set your workout incline, then press ENTER PROGRAM. To start, press the START/STOP but-
ton.

USING THE FAN

There are 3 different fan speeds to choose from 

MEDIUM, HIGH, 

and, 

STOP.  

To set the desired fan

speed press the 

FAN 

button.

Program and Operation

14

START / STOP

INCLINE

PAUSE

ENTER

FAN

FAN SELECTION LED

POWER

SPEED / TIME