background image

Before You Start

4

ELECTRONIC DISPLAY 

CONSOLE 

WATER BOTTLE 
 HOLDER 

(WATER BOTTLE NOT INCLUDED) 

FRONT HAND RAIL 

SIDE HAND RAILS 

CIRCUIT BREAKER 

UPRIGHTS 

MOTOR COVER 

WHEEL 

REAR ROLLER 
ADJUSTMENT BOLTS 

FOOT RAILS 

WALKING BELT 

READING RACK 

Thank you for purchasing the Triumph 8.3t Treadmill!  This quality product you have chosen was designed
to meet your needs for cardiovascular exercise.  
Before you start, please read the Owner's Manual and become familiar with the operation of your new
treadmill.

Remember to take the time to perform the stretching exercises provided to avoid injury.

Do not stand on the walking belt while pressing the Power button or Start/Stop button.
Always adjust the speed of the treadmill in small increments as this treadmill is capable of high speeds.
If you are taking medication, consult your physician to see if the medication will affect your exercise
heart rate.
If you have heart problems, you are not active, and/or are over the age of 35 years, do not use the pre-
set treadmill programs or start an exercise program without first contacting and receiving approval from
your physician.
To avoid the risk of electrical shock, always keep the console dry. Do not spill liquids on the console.
KEYS recommends a sealed water bottle for beverages consumed while using the treadmill.  

Please review the following drawing below to familiarize yourself with the listed parts.  This man-
ual covers several treadmills, so the one pictured below may not be identical to your particular
model

Summary of Contents for Triumph 8.3 Treadmill TRI-8.3t





















Reviews: