3
Navigating the Web Interface
44
M9506A-BC1 5-Slot AXIe Chassis with Integrated Controller User Guide
Launching the Web Interface
Launch the web interface from any web browser using the integrated controller's
IP address or its hostname. The default hostname is
K-M9506A-<last five digits of
serial number>.local
. Note that the hostname can be changed on the BC1 web
interface or via SCPI.
When connecting to the chassis for the first time, make sure that your computer
and the M9506A are in the same subnet and that there is a DHCP server on the
network. Otherwise, the
Keysight Connection Expert
will be unable to detect your
device.
After you have established the initial connection, you can change the Ethernet
settings to use a static IP, if desired.
Preset Ethernet settings are:
- Activated DHCP
- Activated mDNS
- Deactivated AutoIP
Launch the Web Interface from Keysight Connection Expert
1
Open
Keysight Connection Expert
using one of these three methods:
– Click the IO control ( ) in your Windows notification tray to the right of the
task bar and click:
Keysight Connection Expert
.
– From the Windows Start menu, select:
All Programs > Keysight IO Libraries Suite > Keysight Connection Expert
– From a Command Prompt window, type:
<c>:\Program Files\Keysight\IO Libraries Suite\KeysightConnectionExpert.exe
NOTE
If you have problems launching the chassis Web interface, check
your browser’s proxy settings. When Keysight Connection Expert
launches a Web interface for a chassis, it hands off the
http://<address>
to the browser or dedicated web application.
Therefore, it should not use a proxy.
Summary of Contents for M9506A-BC1
Page 1: ...Keysight M9506A BC1 5 Slot AXIe Chassis with Integrated Controller User Guide...
Page 22: ......
Page 42: ......
Page 94: ......
