Keysight M9506A AXIe Chassis Startup Guide
19
Step 5: Install IO Libraries Suite and Connect to the Web Interface
Step 5: Install IO Libraries Suite and Connect to the Web Interface
This step describes how to install the Keysight IO Libraries Suite and verify that
the chassis can be found by Keysight Connection Expert, which is part of IO
Libraries Suite.
As described in section
M9506A AXIe Chassis System Block Diagrams
you can use either the Web Interface or the SFP to monitor and control the
chassis. In this step, the Web Interface is used to verify that the host PC can
communicate to the chassis. Using the SFP to monitor and control the chassis is
described in the
M9506A User’s Guide
.
System Requirements
To install and run the required software (Microsoft .NET, Keysight IO Libraries,
and chassis device drivers), the host PC requires the following:
IMPORTANT: The installation and setup information in this manual is generic.
Some AXIe modules and systems require a different installation and setup
procedure than described in this manual. Refer to the installation
documentation supplied with your AXIe module and or system for detailed
installation information.
For example, installation of the Keysight IO Libraries is not required for all AXIe
systems.
Operating System
Win 7 SP1 32/64bit
Win 8.1 32/64bit
Windows 10 32/64 bit
Minimum RAM
4 GB
Graphics
Support for DirectX 9 graphics with 128MB graphics memory recommended