The
Display
and
Digit Mask
softkeys behave as they do in the
display.
The
Scale
softkey specifies the horizontal scale:
l
Default
sets the scale to equal the measurement range.
l
Manual
allows you to configure the scale either as
High
and
Low
values or as a
Span
around a
Center
value. For example, a scale that goes from a
Low
of -500 Ω to a
High
of 1000 Ω could also be specified
as a
Center
of 250 Ω with a
Span
of 1500 Ω.
Selecting a Secondary Measurement
Press
2nd Meas
to select and display a secondary measurement. For example, for the DCV measurement
function, you can select ACV, Peak, or Pre-Math as the secondary measurement function. With ACV selec-
ted as secondary, the display shows the DCV measurement as a number near to top of the display, DCV in
the bar meter, and the ACV measurement above the bar meter:
Features and Functions
122
Keysight True
volt
Series Operating and Service Guide
