30
Keysight 87406Q Operating and Service Manual
4
Installation and Verification
Installation
Initial inspection
1
Inspect the shipping container for damage. If the shipping
container or cushioning material is damaged, it should be kept
until the contents of the shipment have been checked for
completeness and the instrument has been checked both
mechanically and electrically.
•
Check for mechanical damage such as scratches or dents.
•
Procedures for checking electrical performance are given
under
“Operator’s check” on page 31
or
“Performance
test” on page 32
.
2
If the contents are incomplete, there is mechanical damage or
defect, or the instrument does not pass the electrical
performance test, contact the nearest Keysight Sales and Service
office (refer to
“Contacting Keysight” on page 4
). Keysight will
arrange for repair or replacement of the damaged or defective
equipment. Keep the shipping materials for the carrier’s
inspection.
3
If you are returning the instrument under warranty or for
service, repackaging the instrument requires original shipping
containers and materials or their equivalents. Keysight can
provide packaging materials identical to the original materials.
Refer to
“Contacting Keysight” on page 4
for the Keysight office
nearest to you. Attach a tag indicating the type of service
required, return address, model number, and serial number.
Mark the container
FRAGILE
to insure careful handling. In any
correspondence, refer to the instrument by its model number
and serial number.
