Keysight B1500A Configuration and Connection Guide, Edition 6
2-3
B1500A Accessories
Accessories for the B1500A
WARNING
There are potentially hazardous voltages, up to ± 100 V (MPSMU/HRSMU) or
± 200 V (HPSMU) at the Force, Sense, and Guard terminals.
To prevent electrical shock, do
not
expose these lines.
WARNING
To prevent electrical shock during use, install an interlock circuit and connect the
Interlock cable (See chapter 2.1.6 Other I/F and interlock).
CAUTION
Never connect the Guard terminal to any output, including circuit common, chassis
ground, or any other guard terminal. Doing so will damage the SMU.
16494B-001
Kelvin triaxial cable to E5250A switching matrix
input port, 1.5 m
16494B-002
Kelvin triaxial cable to E5250A switching matrix
input port, 3 m
16494B-003
Kelvin triaxial cable to E5250A switching matrix
input port, 80 cm
GNDU cable
16493L-001
GNDU cable, 1.5 m
16493L-002
GNDU cable, 3 m
16493L-003
GNDU cable, 5 m
16493N-001
GNDU cable for B2200A/B2201A switching matrix
input port, 2 m (2.0 m cable length only)
ASU cable
16493M-001
Triaxial and D-sub cable for ASU(E5288A), 1.5 m
16493M-002
Triaxial and D-sub cable for ASU(E5288A), 3 m
BNC cable
16493B-001
Coaxial cable, BNC(m) to BNC(m), 1.5 m
16493B-002
Coaxial cable, BNC(m) to BNC(m), 3.0 m
The maximum voltage is 40 V, and Maximum current is 200 mA. The
Keysight 16493B Coaxial Cable is designed for use with VSU (Voltage
Source Unit), VMU (Voltage Measurement Unit) or PGU (Pulse
Generator Unit) on the Keysight 4155 series Semiconductor Parameter
Analyzer.
Model/Option
Description
Additional Information
