2-8
Keysight B1500A Configuration and Connection Guide, Edition 6
B1500A Accessories
Accessories for the B1500A
2.1.4 WGFMU accessories
•
WGFMU-to-RSU cables
- have D-sub connection. Two cables are required because
the WGFMU has 2 channels. The 16493R-801 adapter is required and mounted on a
shielding box to make connection to the RSU in the shielding box. Then the 60 cm and
2.4 m cables (16493R-001 and 002) or the 60 cm and 4.4 m cables (16493R-001 and
005) are required instead of the 1.5 m, 3 m, or 5 m cable.
•
Sync connection cable
- is required when two WGFMUs are used. One cable is
furnished with B1530A.
•
Magnet stand
- is optional stand for RSU. The magnet stand is useful for fixing RSU.
•
Triaxial cables (SMU to RSU)
- can be used to connect SMU module to RSU. The
16495H-001 or 16495J-001 connector plate is required and mounted on a shielding box
to make connection to the RSU in the shielding box. Then the 80 cm or 40 cm triaxial
cable is additionally required.
Table 2-4
WGFMU accessories for B1500A semiconductor device analyzer
Model/Option
Description
Additional Information
16493R
WGFMU cables and accessories
WGFMU to RSU cable
16493R-001
WGFMU-to-RSU cable, 0.6 m
16493R-002
WGFMU-to-RSU cable, 2.4 m
16493R-003
WGFMU-to-RSU cable, 3 m
16493R-004
WGFMU-to-RSU cable, 5 m
16493R-005
WGFMU-to-RSU cable, 4.4 m
16493R-006
WGFMU-to-RSU cable, 1.5 m
Cable option for connection with DC probe
16493R-101
SSMC short-open cable for current return path, 50
mm
16493R-102
SSMC short-open cable for current return path, 75
mm
16493R-202
SMA-SSMC cable between RSU and DC probe, 200
mm
Cable option for connection with RF probe
16493R-302
SMA-SMA cable between RSU and RF probe, 200
mm
