clxvi
Keysight E1412A Digital Multimeter User Guide
Multimeter Command Reference
[SENSe:]
Example
Set the Voltage Range for Period Measurements to 100V
PER:VOLT:RANG 100
Voltage range is 100 V.
PERiod:VOLTage:RANGe?
[SENSe:]PERiod:VOLTage:RANGe? [MIN|MAX]
returns one of the following
numbers to the output buffer:
–
0.1, 1, 10, 100 or 300 corresponding to the range set.
–
MIN
returns 0.1.
–
MAX
returns 300.
Example
Query the Period Voltage Range
PER:VOLT:RANG?
Query the voltage range for period
measurements.
enter statement
Enter response into computer.
PERiod:VOLTage:RANGe:AUTO
[SENSe:]PERiod:VOLTage:RANGe:AUTO <
mode
>
enables or disables the
autorange function for the signal level of period measurements.
Parameters
Comments
–
You can substitute decimal values for the
OFF
(“
0
”) and
ON
(“
1
”)
parameters.
–
When autoranging is
ON
, the multimeter samples the input before each
measurement and selects the appropriate range.
–
If you explicitly select a range using
PERiod:VOLT:RANGe
, autoranging is
turned
OFF
.
–
Related Commands:
CONFigure
,
FREQuency:VOLT:RANGe
–
*RST
Condition:
PER:VOLT:RANG:AUTO ON
Parameter Name Parameter Type
Range of Values
Default
Units
<
mode
>
boolean
OFF|0|ON|1
none
Summary of Contents for E1412A
