xciv
Keysight E1412A Digital Multimeter User Guide
Multimeter Command Reference
CALCulate
:AVERage:MINimum?
CALCulate:AVERage:MINimum? reads the minimum value found from an
AVERage function operation. The min value is cleared when AVERage is enabled
(CALC:FUNC AVER and CALC:STAT ON commands), when power is removed, or
after the multimeter is reset. The minimum value is stored in volatile memory.
Example
Query the Minimum Value Found During an
AVERage
Math Operation
CALC:AVER:MIN?
Query the min value.
:DB:REFerence
CALCulate:DB:REFerence <value>|MIN|MAX s
tores a relative value in the dB Relative
Register.
You must turn on the math operation e.g., execute CALC:STAT ON
before writing to the math register
. You can set the relative value to any number
between
200dBm (the
MIN
and
MAX
values). The dB reference is stored in
volatile memory.
Example
Set the
DB
Reference Value
CALC:STAT ON
Turn on the math operation.
CALC:DB:REF 60
Sets DB reference to 60 dBm.
CALC:FUNC DB
Select the DB math operation. You can select the
calculate function at any time before or after enabling the calculate
state.
:DB:REFerence?
CALCulate:DB:REFerence? [MIN|MAX]
queries dB reference value.
Example
Query the
DB
Reference Value Set for the
DB
Math Operation
CALC:DB:REF?
Query the DB reference value.
Summary of Contents for E1412A
