4
Error Messages
Execution Error Messages
132
E3632A User’s Guide
-138
Suffix not allowed
A suffix was received following a numeric parameter which does not accept a suffix.
Example:
STAT:QUES:ENAB 18 SEC
(
SEC
is not a valid suffix.)
-141
Invalid character data
Either the character data element contained an invalid character or the particular element received was
not valid for the header.
-144
Character data too long
The character data element contained too many characters.
-148
Character data not allowed
A discrete parameter was received but a character string or a numeric parameter was expected. Check
the list of parameters to verify that you have used a valid parameter type.
Example:
DISP:TEXT ON
-151
Invalid string data
An invalid character string was received. Check to see if you have enclosed the character string in single
or double quotes.
Example:
DISP:TEXT ’ON
-158
String data not allowed
A character string was received but is not allowed for the command. Check the list of parameters to
verify that you have used a valid parameter type.
Example:
TRIG:DEL ‘zero’
-160 to -168
Block data errors
The power supply does not accept block data.
-170 to -178
Expression errors
The power supply does not accept mathematical expressions.
-211
Trigger ignored
A Group Execute Trigger (GET) or
*TRG
was received but the trigger was ignored. The trigger source
should be selected to the bus and the trigger subsystem should be initiated by the
INIT[:IMM]
command.
-213
Init ignored
An
INITiate
command was received but could not be executed because a measurement was already
in progress. Send a device clear to halt a measurement in progress and place the power supply in the
“idle” state.
Table 4-1
Execution error messages (continued)
Summary of Contents for E3632A
