32
Keysight M8290A Getting Started Guide
3
Using the Instrument
Setting up the M829xA in the Keysight OMA Software
A standard M8290A system is pre-configured at the factory. This section
shows how to modify the factory configuration or to configure a
stand-alone module.
1 In the Keysight 89600 VSA Software interface, select
Utilities
>
Hardware
>
Discovered Instruments
to view a list of all available
instruments. A screen similar to the following is displayed.
However, if your module is not listed, please add it to the Connection
Expert as described in section
Adding the M829xA to the Connection
on page 30 and hit the refresh button (
).
2 Switch to the
Configurations
tab and click on the plus (
) button.
Summary of Contents for M8290A
Page 8: ...8 Keysight M8290A Getting Started Guide ...
Page 26: ...26 Keysight M8290A Getting Started Guide 2 Software Installation ...
Page 28: ......
Page 48: ......