Keysight M9018A PXIe 18-Slot Chassis Startup Guide
39
Appendix B: Chassis Specifications
1
This specification applies to Keysight M 9018A chassis serial num bers TW 52460101 and later.
Chassis w ith prior serial num bers lim ited low -line pow er to 900W nom , 667.5 W DC Output Pow er.
1
The maximum current from each supply is the same for both low-line and
high-line inputs. However, the total power
supplied for all rails (except 5 Vaux) must not exceed 710 W on low-line
(100-120 Vac input)
2
The total power supplied for all rails (except 5 Vaux) must not exceed 860 W.
3
The total power supplied for 3.3 V, 12 V, and -12 V rails must not exceed 616 W.
4 For Keysight M9018A chassis with serial numbers before TW52460101, the
maximum current allowed on the +12 V rail was 47.2 A.
AC power supply - Category II
Voltage
Power
Operating voltage/power (low line)
100-120V, 1000W
nom
1
717.5 W DC Output
Power
1
Operating voltage/power (high line)
220-240V, 1200W
nom
867.5 W DC Output
Power
Input frequency
50/60 Hz
Mains supply voltage fluctuations are not to exceed ±10% of the nominal
voltage
Transient overvoltages typically present on the Mains supply.
DC supplies
1
Voltage
Maximum Current
2
Load Regulation
Maximum ripple and noise
(20 MHz BW)
+3.3 V
60 A
3
1%
1.5% (pk-pk)
+5 V
58.8 A
1%
1.5% (pk-pk)
+12 V
51.3 A
3, 4
1%
1.5% (pk-pk)
-12 V
4 A
3
1%
1.5% (pk-pk)
+5 Vaux
1.5 A
1%
50 mV (pk-pk)
