4
0
Keysight M9018A PXIe 18-Slot Chassis Startup Guide
Appendix B: Chassis Specifications
Important safety information
To ensure comprehensive availability of chassis safety information, this section
lists important warning and caution safety notices from the M9018A User Guide.
PCIe cable connector and receptacle mating cycles
Connector on:
Maximum number of mating cycles:
Y1200A/B and Y1202A PCIe cables
250
M9021A Cable Interface module
250
M9045A/B ExpressCard Adapter
250
M9048A Desktop Adapter
250
- This is a Safety Class 1 Product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of
the protective conductor inside or outside of the product is likely to make
the product dangerous. Intentional interruption is prohibited. Inspect the
protective conductor periodically to ensure that it is uninterrupted.
- No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock, do not remove covers.
- To prevent electrical shock, disconnect the chassis power cord before
cleaning. Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
- Cleaning connectors with alcohol shall only be done with the chassis power
cord removed and in a well-ventilated area. Allow all residual alcohol
moisture to evaporate, and the fumes to dissipate prior to energizing the
chassis.
Restoring the chassis PCIe switch fabric to its factory default
configuration requires pressing a pushbutton internal to the chassis
while the chassis is powered up. Only qualified, service-trained
personnel shall be allowed to remove the instrument cover and actuate
the pushbutton while the instrument is energized. High current and
high energy source connectors are proximate to the pushbutton which
could cause potential burns if short circuited.
To prevent injury during rack mounting, the chassis should be empty of
modules and two people should lift the chassis into the rack.
