Keysight M9037A PXIe, Startup Manual

Keysight M9037A PXIe Embedded Controller Startup Guide

21

Step 4: Review Windows Configuration

User Data Backup

All user data should be regularly backed up to an external memory device. This 

can be done across a network or to a USB device. Your IT department may 

already have a backup strategy which is suitable for the system and data. Also, 

user data back up should be done just prior to sending the controller back to 

Keysight for service.

System Backup and Recovery

A Microsoft Windows operating system is the only operating system installed on 

your M9037A. There is a small system partition for the Keysight Recovery System 

on the SSD. During the boot process, you are given the choice to boot to 

Windows normally or boot from the recovery partition. Refer to the M9037A User 

Guide for detailed information.

Auto Login

Your M9037A Windows default behavior is to automatically login to the 

Administrator account every time it boots. You do not need to type a password.

Default Administrator Password: 

Keysight4u!

They Keysight standard for the Administrator password is 

Keysight4u!

Your M9037A Administrator account is most likely is set with this password. If it 
is not set with this password, then there is no password.

Change Administrator Password

The default Administrator password is public knowledge. Keysight recommends 

that you change your password for improved security.

How to change your password for “Windows 10 Enterprise 2016 LTSB”:

1. Click the 

Start

 button at the bottom left of your screen.

2. Click

Settings

 from the list to the left.

3. Select 

Accounts.

4. Select 

Sign

‐

in

options

 from the menu.

5. Click on 

Change

 under Change your account password.

Anyone who knows your current Administrator password can 

change the password. When you change your password you must 

enter the current password. Because Auto Login is enabled, you 

may not notice if someone changed the password.