M9484C Startup Guide
51
Front and Rear Panel Features
Front Panel Features
5
19.2 GHz Out
SMA
Output of 19.2 GHz frequency reference. A factory installed cable
connects the 19.2 GHz Out connector to the 19.2 GHz In.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.
6
19.2 GHz Out
SMA
Output of 19.2 GHz frequency reference. This 19.2 GHz Out
connector has a factory installed 50 Ω termination.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.
7
On/Off Switch
Push Button
Power Switch
8
Trig A, B, or C
SMB
General Purpose Trigger/Marker Ports
100 MHz maximum frequency (drive or receive)
As a Driver:
— 3.3 V output
— Max voltage applied at any output in high-Z state is
5.5 V and 3.8 V when in high or low state
— 50
Ω
output resistance
As a Receiver:
— 5 V input
— 5 V tolerant input (damage at 5.5 V)
— Selectable input termination (50
Ω or 10 K Ω)
— Receiver threshold resolution (5 mV)
9
Ext 1 or 2
SMB
External Inputs 1 and 2
— 16 bit ADC
— Selectable input impedance: 50
Ω, 600 Ω, or 1 M Ω)
— Input Bandwidth: 10 MHz
— Input Range: ±1 V (±5 V tolerant)
10
LF Out
SMB
Low Frequency Output
— 16 bit DAC
— Output impedance: 50
Ω
— Output range into 50
Ω:
±5 V (DC to 5 MHz), ±2.5 V
(5 MHz to 10 MHz)
— Output range into 1 M
Ω:
±6.5 V (DC to 5 MHz), ±4.5 V
(5 MHz to 10 MHz)
— Bandwidth: 10 MHz (sine wave); 2 MHz (square and
triangle waves)
Item
Connector Type
Description
#
Name
Summary of Contents for M9484C
