Available Probe Heads and Accessories - Overview
2
InfiniiMax RC Probe Amplifier and Probe Heads User’s Guide
17
5. N5425B Differential ZIF Probe Head
(refer to
for details)
•
Ideal for probing multiple signals in tight
spaces such as DDR memory
•
ZIFs can be installed at multiple locations
on your DUT
•
Ideal for hard to reach, small fine pitch
targets
•
ZIF feature allows connection without
compressing the delicate wires which
cannot support this compression
•
Recommended for DDR4, DDR5, LPDDR4,
MIPI D-Phy 2.0 and C-Phy 2.0
With N5426A ZIF Tip
18 GHz
0.33 pF 0.53 pF
N2884A Fine Wire ZIF Tip
18 GHz
0.35 pF
N/A
6. N5381B Differential Solder-in Probe Head
(refer to 1168/9B-Series Probes user’s guide)
•
Solder-in hands free connection
•
Recommended for DDR4, DDR5, LPDDR4,
MIPI D-Phy 2.0
12 GHz
0.21 pF 0.35 pF
7. N5380B Differential SMA Probe Head
(refer to 1168/9B-Series Probes user’s guide)
•
Suitable for differential cabled
measurement using only one channel of the
oscilloscope
•
Offset matched SMA cables adapt to
variable spacing
•
Ideal for signaling standards such as HDMI
and MIPI Mphy that require termination to a
common DC voltage (± 4 V) rather than a
ground
Note
: The plastic housing on the N5380B
needs to be removed to mate with the
MX0023A amplifier. Refer to the
1168/9B-Series Probes user's guide for
details of this removal procedure.
12 GHz
N/A
N/A
Table 2
Supported Probe Heads (Sheet 2 of 3)
Probe Head
(listed in the order of BW)
Recommended Usage
Bandwidth
a
Cdiff
b
(pF)
Cse
c
(pF)
