background image

2

Notices

Copyright Notice

© Keysight Technologies 2014-2019

No part of this manual may be 

reproduced in any form or by any 

means (including electronic storage 

and retrieval or translation into a 

foreign language) without prior 

agreement and written consent from 

Keysight Technologies, Inc. as 

governed by United States and 
international copyright laws.

Manual Part Number

N5180-90079

Edition

Edition: 1, June 2019

Supersedes: June 2017

Published by:

Keysight Technologies Inc.

1400 Fountaingrove Parkway
Santa Rosa, CA 95403

Technology Licenses

The hardware and/or software 

described in this document are 

furnished under a license and may be 

used or copied only in accordance 

with the terms of such license.

U.S Government Rights

The Software is “commercial 

computer software,” as defined by 

Federal Acquisition Regulation (“FAR”) 

2.101. Pursuant to FAR 12.212 and 

27.405-3 and Department of Defense 

FAR Supplement (“DFARS”) 227.7202, 

the U.S. government acquires 

commercial computer software under 

the same terms by which the software 

is customarily provided to the public. 

Accordingly, Keysight provides the 

Software to U.S. government 

customers under its standard 

commercial license, which is 

embodied in its End User License 

Agreement (EULA), a copy of which 

can be found at 

http://www.keysight.com/find/sweula

The license set forth in the EULA 

represents the exclusive authority by 

which the U.S. government may use, 

modify, distribute, or disclose the 

Software. The EULA and the license 

set forth therein, does not require or 

permit, among other things, that 

Keysight: (1) Furnish technical 

information related to commercial 

computer software or commercial 

computer software documentation 

that is not customarily provided to the 

public; or (2) Relinquish to, or 

otherwise provide, the government 

rights in excess of these rights 

customarily provided to the public to 

use, modify, reproduce, release, 

perform, display, or disclose 

commercial computer software or 

commercial computer software 

documentation. No additional 

government requirements beyond 

those set forth in the EULA shall apply, 

except to the extent that those terms, 

rights, or licenses are explicitly 

required from all providers of 

commercial computer software 

pursuant to the FAR and the DFARS 

and are set forth specifically in writing 

elsewhere in the EULA. Keysight shall 

be under no obligation to update, 

revise or otherwise modify the 

Software. With respect to any 

technical data as defined by FAR 

2.101, pursuant to FAR 12.211 and 

27.404.2 and DFARS 227.7102, the 

U.S. government acquires no greater 

than Limited Rights as defined in FAR 

27.401 or DFAR 227.7103-5 (c), as 

applicable in any technical data.

Warranty

T

HE

 

MATERIAL

 

CONTAINED

 

IN

 

THIS

 

DOCUMENT

 

IS

 

PROVIDED

 “

AS

 

IS

,” 

AND

 

IS

 

SUBJECT

 

TO

 

BEING

 

CHANGED

WITHOUT

 

NOTICE

IN

 

FUTURE

 

EDITIONS

. F

URTHER

TO

 

THE

 

MAXIMUM

 

EXTENT

 

PERMITTED

 

BY

 

APPLICABLE

 

LAW

, K

EYSIGHT

 

DISCLAIMS

 

ALL

 

WARRANTIES

EITHER

 

EXPRESS

 

OR

 

IMPLIED

WITH

 

REGARD

 

TO

 

THIS

 

MANUAL

 

AND

 

ANY

 

INFORMATION

 

CONTAINED

 

HEREIN

INCLUDING

 

BUT

 

NOT

 

LIMITED

 

TO

 

THE

 

IMPLIED

 

WARRANTIES

 

OF

 

MERCHANTABILITY

 

AND

 

FITNESS

 

FOR

 

A

 

PARTICULAR

 

PURPOSE

K

EYSIGHT

 

SHALL

 

NOT

 

BE

 

LIABLE

 

FOR

 

ERRORS

 

OR

 

FOR

 

INCIDENTAL

 

OR

 

CONSEQUENTIAL

 

DAMAGES

 

IN

 

CONNECTION

 

WITH

 

THE

 

FURNISHING

USE

OR

 

PERFORMANCE

 

OF

 

THIS

 

DOCUMENT

 

OR

 

OF

 

ANY

 

INFORMATION

 

CONTAINED

 

HEREIN

S

HOULD

 K

EYSIGHT

 

AND

 

THE

 

USER

 

HAVE

 

A

 

SEPARATE

 

WRITTEN

 

AGREEMENT

 

WITH

 

WARRANTY

 

TERMS

 

COVERING

 

THE

 

MATERIAL

 

IN

 

THIS

 

DOCUMENT

 

THAT

 

CONFLICT

 

WITH

 

THESE

 

TERMS

THE

 

WARRANTY

 

TERMS

 

IN

 

THE

 

SEPARATE

 

AGREEMENT

 

SHALL

 

CONTROL

.

Safety Information

CAUTION

 notice denotes a hazard. It 

calls attention to an operating 

procedure, practice, or the like that, if 

not correctly performed or adhered to, 

could result in damage to the product 

or loss of important data. Do not 

proceed beyond a CAUTION notice 

until the indicated conditions are fully 

understood and met. 

WARNING

 notice denotes a hazard. 

It calls attention to an operating 

procedure, practice, or the like that, if 

not correctly performed or adhered to, 

could result in personal injury or 

death. Do not proceed beyond a 

WARNING notice until the indicated 

conditions are fully understood and 

met.

Summary of Contents for N5166B

























Reviews: