U3042AE16
Troubleshooting the Test Set
Troubleshooting the Test Set
If the test set is not operating properly, use the following procedures to aid in isolating the
problem.
Refer to the Keysight PNA Series: Service & Support Home Page at:
To request service, please contact your local service center. In the US, call 800-829-4444. For a
listing of service centers worldwide, please visit us at
http://keysight.com/find/service
The opening of covers or removal of parts is likely to expose the user to
dangerous voltages. Disconnect the instrument from all voltage sources before
being opened.
Electrostatic Discharge Protection
Electrostatic discharge (ESD) can damage or destroy electronic components. The instrument is
shipped in materials that prevent damage from static, and should only be removed from the
packaging in an anti-static area ensuring that the correct anti-static precautions are taken.
Two types of ESD protection are listed below. Purchase acceptable ESD accessories from your
local supplier.
• Conductive table-mat and wrist-strap combination
• Conductive floor-mat and heal-strap combination
Both types, when used together, provide a significant level of ESD protection. To ensure user
safety, static-safe accessories must provide at least 1 M
Ω
of isolation from ground.
User's and Service Guide U3042-90012
67
