4
Installation and Verification
28
Keysight U7108x and U7110x Operating and Service Manual
Installation
Initial inspection
1
Inspect the shipping container for damage. If the shipping container or cushioning material is
damaged, it should be kept until the contents of the shipment have been checked for
completeness and the instrument has been checked both mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
2
If the contents are incomplete, there is mechanical damage or defect, or the instrument does
not pass the electrical performance test, contact the nearest Keysight Sales and Service office
(refer to
on page 5). Keysight will arrange for repair or
replacement of the damaged or defective equipment. Keep the shipping materials for the
carrier’s inspection.
3
If you are returning the instrument under warranty or for service, repackaging the instrument
requires original shipping containers and materials or their equivalents. Keysight can provide
packaging materials identical to the original materials. Refer to
on page 5 for the Keysight office nearest to you. Attach a tag indicating the type of service
required, return address, model number, and serial number. Mark the container
FRAGILE
to
insure careful handling. In any correspondence, refer to the instrument by its model number
and serial number.
