6.1 - Problem Solving
If you are having problems with your Keyspan USB to Serial Adapter in Windows, please read
the following instructions to assist you in troubleshooting your Keyspan adapter.
Hardware Troubleshooting
Step 1
-
Use the Keyspan Serial Assistant
Launch the
Keyspan Serial Assistant
application. When you open the
Keyspan Serial Assistant
application, the 'Adapter Status' tab will show your Keyspan adapter, its COM port number (ie
COM1, COM2, etc.) and its COM Port Status.(IDLE or BUSY).
If you do not receive either of these messages, please contact
Keyspan Tech Support
for further
assistance.
Otherwise, skip ahead to Step 2.
Software/Serial Device Troubleshooting
Step 2
-
Check The Physical Connections
Make certain that your serial device is powered on and is properly connected to the Keyspan Serial
Adapter.
Proceed to Step 3 ...
Step 3
-
Check Your Serial Device's Software Configuration
Check to see if your serial device's software is configured to use the Keyspan port . Please refer to
your serial device's documentation for instructions on how to select/switch/configure a serial port in
that software.
Once you've found your software port configuration screen, does it display the Keyspan USB
Serial Adapter COM port number?
If you do not see the Keyspan COM port number please contact
Keyspan Tech Support
for
further assistance.
Keyspan:USB Serial Adapter for Windows-v3.4 Manual
This User Manual applies to the Keyspan USB Serial Adapter Software for Windows.
Rev 03jul13
Page 20