Troubleshooting – Changing Motor Programs
The motors have the ability to function as either constant flow or constant torque. This provides the ability to change motor
programs without the need to reprogram the motor.
NOTE:
Changes will only take effect upon restarting the motor (must be powered off and then back on) and cannot be made
live.
Switching from constant flow to constant torque:
To
switch the motor from constant flow to constant torque
all that is required is to open the connection of the white
wire as shown.
Switching from constant torque to constant flow:
To
switch the motor from constant torque to constant flow
all that is required is to close the connection of the white
wire as shown.
Motor Setting - Constant Torque
Motor Setting - Constant Flow
The motor will be factory wired to the motor program selected on the order.
NOTE:
If using the BFC, please updated the BFC programming to reflect the change in motor program.
Please refer to the
BFC manual
for instructions.
For more information visit
KeystoneCleanAir.com
v001
35
Kr
own
Fan Filter Units |
Troubleshooting
