MONITOR OPEN FRAME 17”
WITH 5W RESISTIVE
TOUCHSCREEN
AND RS232 INTERFACE
Creation Date
06/08/2008 10.45.00
www.keyfuture.com
KF s.r.l.
Strada S.Anna 88/D
41100 MODENA
(ITALY)
Tel: +39 059 313920
Fax: +39 059 313916
Revision:
No.1
Page 6 of 16
File Name:
KFE-DIS000070 Rev.1 (User
Manual)
6 / 16
Absolute Maximum Ratings :
Values
Parameter
Symbol
Min.
Max.
Units
Notes
Power Supply Input
Voltage
VCC
－
0.3
＋
5.5
V dc At 25°
Operating
Temperature
TOP
0
＋
50
℃
1
Storage Temperature
TST
－
20
＋
60
℃
1
Operating Ambient
Humidity
HOP
10
＋
90
%RH 1
Storage Humidity
HST
10
＋
90
%RH 1
Start up and Connections
Note:
Before connecting the touch monitor and the PC, be sure they are turned off.
1.
Connect one end of the power adapter to the monitor and the other end to the
connector of the power cord.
2.
Connect one end of the serial (RS232) cable to the touchscreen controller and the
other end (which has got a DB9 connector) to the computer;
3.
Connect the first PS2 connector on the PS2 power cable to the computer and the
second to the keyboard (if it’s used);
4.
Connect one end of the video cable to the rear side of computer and the other end to
the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper
grounding.
5.
Press the power button on the OSD keyboard to turn on the monitor.
