background image

4

 

 

Attention Owners and Operators 

 

The equipment is designed to provide safe and productive processing, cooking and warming of food products 
as long as the equipment is used in accordance with the instructions in this manual and is properly maintained.   
Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this 
equipment  bear  the  responsibility  to  make  certain  that  this  equipment  is  used  properly  and  safely,  and  to 
strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law.   

Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately 
trained and supervised, and have read and understood this manual. Do not attempt to repair or convert any 
gas types on your own. Repairs and conversions are to be made solely by an authorized  merchant servicer. 
Owners should also ensure that no customers, visitors or other unauthorized personnel come in contact with 
this equipment. Please remember that our company cannot anticipate every circumstance or environment in 
which its equipment will be operated.    It is the responsibility of the owner and the operator to remain alert to 
any hazards posed by the function of this equipment. If you are ever uncertain about a particular task or the 
proper method of operating this equipment, ask your supervisor.   

This  manual  contains  a  number  of  precautions  to  follow  to  help  promote  safe  use  of  this  equipment.   
Throughout the manual you will see additional warnings to help alert you to potential hazards.   

Warnings affecting your personal safety indicated by:

 

 

Warnings affecting your possible damage to the equipment and property are indicated by: 

 

 

If any warning labels or this manual are misplaced, damaged, or illegible, or if you require additional copies, 
please contact your nearest representative or equipment supplier directly for these items at no charge.   

Please remember that this manual or the warning labels do not replace the need to be alert, to properly train 
and supervise operators, and to use common sense when using this equipment.   

 
 

 
 
 
 
 
 
 

Model 

 

GAS 

Number Of Burners 

 

BTU/hr Input Rating 

 

12

”Charbroiler 

Natural   

35,000 

24

”Charbroiler 

Natural 

70,000 

36

”Charbroiler 

Natural 

105,000 

48

”Charbroiler 

Natural 

140,000 

 

Summary of Contents for KF-CB12-M

















Reviews: