NAUT324C-256K
- Technical reference - Rev. B
Page 30
16.2. COMMAND SET table
Command
ASCII
Function
Value Range
<CR>
Print command with line feed
<LF>
Print command with line feed
<ESC> "@"
Initialize printer, hardware reset
<ESC> "A"
Erase data in print buffer
<ESC> "a"
Automatic status transmission
<ESC> "b"
Stop automatic status
transmission
<ESC> “V” <0xFD>
Reset printer parameters to
default (Factory set up)
<ESC> "C" n
Cut paper
<ESC> "ca" ; <ESC> "cA"
<ESC> "cb" ; <ESC> "cB"
Barcode 39 printout
<ESC> "cc" ; <ESC> "cC"
Barcode 128 printout
<ESC> "d" n
Initialize printer
<ESC> "D" n
Print text mode / data mode
n:= {0,1}
<ESC> "F" nh nl
Paper feed 1-2400 lines (300
mm max)
<ESC> "g" n g1....gn
Pixel graphics PCL5, print
graphics line with n bytes length
<ESC> "H" n
Change character height from
0: normal height to 7: eight-fold
height
n:={0,1, ...,7}
<ESC>
"I"
n
Print black on white / white in
black
n:= {0,1}
<ESC> “i” <font num><n col><n
row><font name><0x00>
Define font, size and name
<ESC> "j" n
Bold printing on/off
n:= {0,1}
<ESC> "k"
Send back current status
<ESC> "L" n
Print with/without underline
n:= {0,1}
ESC> “l” <font num><n char><data
len><ch><cl>...<ch><cl>.
Save font
<ESC> “M” <font num>.
Delete font
<ESC> "m" n
Set graphics mode
n:={0,1, ...,6}
<ESC> "N" n
Tabulation spacing n:=
{1,32}
<ESC> "P" n
Select character set no. n
n:= {0,1}
<ESC> "Q" <Param-Adress> <Param.>
Set-up printer, parameter
addresses
<ESC> "T" n
Execute batch files
<ESC> “t” <batch num><len nh><len nl>
{data }
Save bacth file
<ESC> “t” <0x80+batch_num>
Delete batch file
<TAB> Horizontal
tabulation
<ESC> "V" 0
Save printer set-up
<ESC> "V" <parameter> <value>
Save printer setup, parameter
addresses
<ESC> "W" n
Change character width from
single width to eight-fold width
n:={0,1,2,3}
<ESC> "x" n
Inquiry of system parameters
