background image

Page 2

Manual Conventions

This manual uses the following symbols to help 
differentiate between different kinds of information. 
The safety symbol is used with a key word to alert 
you to potential hazards in operating and owning 
a plow.

Follow all safety messages to avoid or reduce the 
risk of serious injury or death.

DANGER

DANGER indicates an imminently 

hazardous situation which, if not avoided, will 

result in death or serious injury. 

WARNING

WARNING indicates a potentially 

hazardous situation which, if not avoided, 

could result in death or serious injury. 

CAUTION

CAUTION indicates a potentially 

hazardous situation which, if not avoided, 

may result in minor or moderate injury.

 CAUTION

CAUTION used without the safety alert 

symbol indicates a potentially hazardous 

situation which, if not avoided, may result in 

property damage.

NOTE

If you have questions regarding your plow, 

we can help. Please call our help line at 

1-800-999-3388.

To help you make informed decisions regarding safety, we have included instructions and 
information on labels. This information is provided with the intent to help avoid potential 
hazards that may harm you or others. It is, in no way, possible for us to inform you of every 
hazard you may come across with this product.

Summary of Contents for OPEN TRAIL 105635









Reviews: