ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
45
7
After all settings are complete, click
Apply
.
«
TIP
»
• To copy the current settings to other days, select the day, then click
Copy
.
• To copy the current settings to other channels, select the channel, then click
Copy
.
8
When data saving is complete, click
OK
.
4.2.3 Record Setup
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
Main Menu
>
RECORD
, then select the
Record Setup
tab. The Framerate settings are displayed on a
table.
3
On
Mode
, select the type of record mode. Options are:
D1
or
960H
.
Note:
If the record mode setting is set to 960H, it is recommended to use a 600 TVL or higher resolution camera.
4
Select the channel and adjust the corresponding settings such as
Resolution
,
FPS
, and
Quality
.
Note:
If the frame rate set is over the system limitation, a message is displayed on the screen.
5
Check the
Audio
box to enable audio.
6
After all settings are complete, click
Apply
.
7
When data saving is complete, click
OK
.
«
TIP
»
To copy the record setup setting to other channels, select the channel(s) in
Copy To
, then click
Copy
.
