KGUARD Standalone DVR KG-SH122E.V2/SH222E.V2/SH522E.V2 User Manual(Software)
38
www.kguardsecurity.com
All rights reserved
If Auto Overwrite is disabled and the Alarm/Normal Record disc drive capacity
reaches the end, the system will not overwrite the recorded video/audio, and
hence not record Alarm/Normal video/audio, until the user presses the
Alarm
Reset
button.
HDD Full
Action
When the H.D.D is full the Alarm will
active(normal recording mode).
You enable or disable it.
Press”
ENTER”
or
+/-
to
check/uncheck this item
(Mouse: Left click)
Duration
The delay time of Alarm and buzzer
after the video loss was detected.
(3 seconds - 60 minutes)
Press”
ENTER”
or +/- button
(Mouse: Left click)
to adjust
the value.
Alarm Out
To define which Alarm Output will be
triggered when the corresponding
partition, Alarm Record or Normal
Record, is full.
Press”
ENTER”
or
+/-
to
check/uncheck this item
(Mouse: Left click)
Alarm Outputs (
(N/A,NC (1), NO (2)
).
Buzzer
To activate the internal Buzzer, when
the video loss was detected
Press
ENTER
or
+/-
to
check/uncheck this item.
(Mouse: Left click)
Log
To log into event logs.
Press
ENTER
or
+/-
to
check/uncheck this item.
(Mouse: Left click)
To send the event e-mail , remotely
Press
ENTER
or
+/-
to
check/uncheck this item.
(Mouse: Left click)
