KGUARD Standalone DVR KG-SH122E.V2/SH222E.V2/SH522E.V2 User Manual(Software)
54
www.kguardsecurity.com
All rights reserved
All Functions
Functions
Description
Button/Remote control
Device Type
For selecting the type of PTZ.
(
PTZ
,
Keyboard
,
POS
,
PTZ
+
Keyboard
or
N/A
(Not Available).
Press
+/-
buttons to change
the type.
Model
PTZ model
(for PTZ and PTZ+Keyboard)
,
Keyboard model or POS printer type of the
connected devices..
please refer to the
note , below:
Baud Rate
Baud Rate
Press
+/-
buttons to change
the value
Data Bit
Data Bit
Press
+/-
buttons to change
the value.
Stop Bit
Stop bit
Press
+/-
buttons to change
the value.
Parity
(
Odd
,
Even
, or
None
)
Press
+/-
buttons to change
the value.
DVR/Camera
ID
For
PTZ/Keyboard
=> the device ID for
this digital video/audio recorder, and it
must not conflict with the other
devices connected in the same control
port.; for
POS
=> the Camera ID to
receive the POS data
.
Press
+/-
buttons to change
the ID.
The PTZ models supported include
Pelco D protocol Dome
,
SamSung SCC-641P
,
Kalatel Cyber Dome
,
PIH-series
,
Dynacolor
,
Bosch AutoDome
,
Video Trek
, etc. The
Keyboard models supported include
Terminal
(EX. VT-100) and
Control Protocol
. For
Terminal type, please use the corresponding ASCII characters for
code
as described in
Appendix
. The POS printer types supported include
Epson General
(EX.
Epson-TM200
,
Epson-TMU300
,
Epson-TMU675
,
Epson-TMT882
,
Epson-RPU420
, and
Epson-MD332S
) and
Epson-TMU295
. Press
+/-
buttons to change the supported model (or protocol).
if PTZ+Keyboard is selected for Device Type, the Keyboard model is always Control
Protocol, and the other settings (Baud Rate, Data Bit, Stop Bit, and Parity) are the same as
the PTZ Model selected. Please also make sure that the installer must be sure that the
Keyboard Control Protocol and the PTZ Protocol won’t conflict with each other.