background image

4

RTB SERIES CABLE REEL MANUAL

KH200-02619_REV-A

SECTION 1 - SAFETY

Safety Information Responsibility

All owner, operator, and maintenance personnel must read and understand all manuals associated with this 

product before installation, operation, or maintenance.
The manual provides information on the recommended installation, operation, and maintenance of this 

product. Failure to read and follow the information provided could cause harm to yourself or others and/

or cause product damage. No one should install, operate, or attempt maintenance of this product prior to 

familiarizing themselves with the information in this manual.

Safety Messages

The following safety messages are used in this manual to alert you to specific and important safety related 

information.

 

CAUTION

• 

CAUTION indicates unsafe actions or situations that have the potential to cause injury, and/or minor equipment 

or property damage.

 

DANGER

 

• 

DANGER indicates hazards that have the potential to cause severe personal injury or death.

 

WARNING

• 

WARNING indicates unsafe actions or situations that have the potential to cause severe injury, death, and/or 

major equipment or property damage.

NOTE

• 

NOTE is used to alert you to installation, operation, programming, or maintenance information that is important, 

but not hazard related.

Summary of Contents for RTB Series























Reviews: