22
Reclining Backrest
3. Install adapter plates (C) and recline latch (D) with five bolts (A & B), three spacers (F & H), spring (G)
and a nut (I) using two 3mm Allen wrenches and a 4mm Allen wrench with 10mm wrench.
NOTE: The spring (G) saddles the recline latch (D).
4. Install the back tube plug (E) into the backrest tube.
5. Install the backplates (B & J) to the adapter plate assembly and frame with six bolts (A), two short
spacers (D), two bearings (E), two bearing liners (F), two upper rollers (G), spring (H), two saddles (M),
two dual saddles (C), three spacers (L & I) and six nuts (K) using a 5mm Allen wrench and a 10mm
wrench.
NOTE: The inner back plate (J) shown is the transit version as an example. The installation is the
same for transit and standard inner back plates.
A
B
C
D
E
F
G
H
C
I
B
A
B
C
C
D
E
F
G
G
D
E
F
H
I
J
K
L
M
M
L
