41
Contracture Footrest
8. Determine whether the contracture footrest is going to be set up in the outside mount or inside mount
position. Install footrest assembly, outside or inside mounted, by sliding the contracture seat tube (C)
onto the frame. Assemble footrest to contracture seat tube by installing T-Nut (D) along channel on the
inside of the mount rail (E). Secure pieces in place by installing screw (A) through seat tube into the
mount rail using a 10mm wrench and a screw (F) through the sliding mount into the bottom of the T-Nut
using a 10mm wrench. Last, install end cap (B) into seat tube. Repeat on opposite side.
9. Reinstall strut tube, in the same position as before, and and any seating system, seat pan or cushion
that may have been removed before the installation process.
NOTE: See Step 6 for strut tube hardware and tools if needed.
A
B
C
D
E
F
Outside Mount
Inside Mount
