3
III. NOTICE - READ BEFORE USE
A. Use
Intended Use:
Ki Mobility Manual wheelchairs are manually operated devices with wheels that
are intended for medical purposes to provide mobility to persons restricted to a sitting position.
Intended User:
The wheelchair is intended for users with physical disabilities or limitations that
inhibit the ability to functionally ambulate. Wheelchair users may be either dependent or
independent in the use of the wheelchair for mobility.
Indications for Use:
Possessing a need for wheeled mobility that the specific model can be
configured to meet, as determined by the user, caregivers, clinicians, and Assistive Technology
Professional (ATP) or other competent clinical or technical professional with appropriate
knowledge of the products being considered.
Contraindications for Use:
The inability of the specific model to accommodate the needs of the
user as determined by the user, caregivers, clinicians, and Assistive Technology Professional
(ATP) or other competent clinical or technical professional with appropriate knowledge of the
products being considered.
B. Your Safety
Any serious adverse events or injuries related to the use of your wheelchair or its
accessories must be reported immediately if the incident directly or indirectly leads to
serious health decline or death of the user or other person. Report any serious events
and/or injuries to Ki Mobility and, if required by local regulation, the competent health
authority where the user and/or other person legally reside.
Do not use this wheelchair without first reading this entire manual. BEFORE riding, you should
be trained in the safe use of this chair by an Assistive Technology Professional (ATP) or other
competent clinical or technical professional. Ki Mobility manufactures many different
wheelchairs that might meet your needs. The recognized best practice for selecting a wheelchair
is to consult with an ATP or other competent technical professional and an experienced clinical
professional such as a physical therapist, occupational therapist or physician. Final selection of
the type of wheelchair, options and adjustments rests solely with you and your technical and
clinical professionals. The options you choose, and the set-up and adjustment of the wheelchair
have a direct impact on its performance, stability and its ability to meet your needs. Factors to
consider that affect your safety and stability are:
a. Your personal abilities and capabilities including strength, balance and coordination.
b. The types of hazards and obstacles you might encounter during your day.
c. The specific dimensions, options and set up. In particular, the seat height, seat depth,
seat angle, back angle, size and position of the rear wheels and size and position of the
front casters.
C. Signal Words
Within this manual you will find what are referred to as “Signal” words. These words are used to
identify and convey the severity of varying hazards. Before using this chair you, and each person
who may assist you, should read this entire manual. Please note the Signal word and consider
any notes, cautions or warnings. Make sure to follow all instructions and use your chair safely.
The Signal word refers to a hazard or unsafe practice that may cause severe injury or death to
you or to other persons. The “Warnings” are in three main categories, as follows:
NOTE – Note indicates a potentially hazardous situation which, if not avoided, could result
in a decline in the performance of the chair or damage to your wheelchair.
CAUTION: Caution indicates a potentially hazardous situation which, if not avoided, could
result in damage to your wheelchair and injury to you.
WARNING: Warning indicates a potentially hazardous situation which, if not avoided,
could result in serious injury or death.
These signal words will be placed throughout the manual, where appropriate to highlight the
hazardous situation. Refer to Section F. for hazardous situations that will apply to the general use
of this wheelchair.
Summary of Contents for Little Wawe Arc TTl
Page 1: ...2020 05 24 XP XPe TTL...