55
Reversing Wheel Lock
1. Identify the type of wheel lock on the chair. The process of reversing the wheel lock will be the same,
but hardware and tools used are slightly different.
2. Remove wheel lock (D) and wheel lock bar (E) from clamp (C) by removing the two bolts (A) and two
lock washers (B) with a 5mm Allen wrench.
NOTE: The push and pull to lock wheel lock is shown below. The process of removing the clamp is
the same for all of the wheel locks.
NOTE: Always loosen wheel lock hardware by alternating between the two bolts while loosening a
little at a time. This prevents overclamping on one set of hardware which can lead to binding of the
fasteners and increased difficulty in removal.
Short Thro Scissor Lock
Low Profile Scissor Lock
Push and Pull to
Lock Wheel Locks
Push to Lock Flush
Mount Wheel Lock
A
B
C
D
E
