22
IV. WHEELCHAIR USE & CONFIGURATION
M. Wheel Locks (Continued)
4. Test the new wheel lock positioning on a flat level surface. Once the wheel locks are
engaged, the wheels should not slip or move. If the wheel locks are not fitted properly
continue to step 5. See Fig. 9.
5. The wheel lock arm can be moved along the different sets of holes on the wheel lock bar for
additional adjustability. Use a 4mm Allen wrench to remove the two bolts (Fig. 10:A), then
move the bar to the new position and reinstall the bolts. Two of the holes (Fig. 10:B) are
shown as dotted lines because their view is obstructed by the clamp.
Fig. 9
A
B
Fig. 10
