26
IV. WHEELCHAIR USE & CONFIGURATION
N. Anti-Tips (Continued)
How to Put the User Activated Anti-Tips into the In Use and Up Positions
(Fig. 16)
1. Grasp rubberized grip and pull down, disengaging anti-tip from the slot in receiver.
2. Rotate into the desired position. The anti-tip should stay in position once the rubberized grip
has been released.
3. Adjust the second anti-tip tube wheel the same way. Both of the wheels should be at exactly
the same height.
How to Put the User Activated Anti-Tips into the Transfer Position (Fig. 17)
1. Lift the wheelchair so the rear wheels are off the ground.
2. Grasp rubberized grip and pull down, disengaging anti-tip from the slot in receiver.
3. Rotate under the wheelchair into the transfer position. The anti-tip should stay in position
once the rubberized grip has been released.
4. Adjust the second anti-tip tube the same way. Both anti-tips should be in the same position.
Fig. 16
Fig. 17
