53
Attendant Foot Lock
Attendant Foot Lock Pedal Assembly
1. Install the foot lock cables (B) and spool (A) into the foot lock pedal (J) and pedal mounts (C & E) with
three bolts (K & G), three spacers (I & F) and three nuts (D & H) using a 5mm Allen wrench, a 10mm
wrench and a 4mm Allen wrench.
2. Install the foot lock assembly into the bracket mount (D) with two bolts (E), two washers (B) and two
nuts (A) using a 4mm Allen wrench and a 10mm wrench. Install the bracket mount assembly onto the
rear strut tube with a bolt (C), washer (F) and nut (G) using a 5mm Allen wrench and a 10mm wrench.
A
B
C
D
E
F
G
H
I
J
K
A B
C
D
E
F
G