KI WorkZone Series, Assembly Instructions Manual

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

3

WorkZone

®

 Single Universal Overhead Cabinet

Assembly Instructions

Figure 1

#10-32 x  /

1

2

"

screw

#8-32 x  /

1

2

"

screw

cabinet side

(right-hand)

cabinet side

(left-hand)

right-hand

stanchion

stanchion

insert (outer)

WorkZone

Desk

left-hand

stanchion

stanchion

insert (inner)

grommet

hole

grommet

covers

Single Universal Overhead 

Cabinet Installation

Important:

 WorkZone desk must be 

fully assembled prior to installing the 

overhead unit.

1. Begin by removing grommet covers 

from the back sides at the top of the 

desk where the overhead cabinet will 

install (Figure 1).

2. Reference Figure 1 below to identify 

the left- and right-hand stanchions, 

as well as the left- and right-hand 

cabinet sides. One side at a time, 

position the appropriate stanchion 

as illustrated such that the lower 

mounting bracket of the stanchion 

inserts into the grommet hole. Align 

the mounting holes in the bracket 

with the holes in the top of the leg 

and secure using two #10-32 x 

1

/

2

” 

screws (Figure 1).

3. Orient the right- and left-hand cabinet 

sides as illustrated, then nest them 

into the tops of the stanchions and 

align the mounting holes. Secure 

from the inside using two #8-32 x 

1

/

2

”

  screws at each stanchion side 

(Figure 1).