background image

5 47

Driving your vehicle

For example, if you drive at 90 km/h
(56 mph), the distance is maintained
as follows;

Distance 4 - approximately 52.5 m

(172 feet)

Distance 3 - approximately 40 m

(130 feet)

Distance 2 - approximately 30 m

(98 feet)

Distance 1 - approximately 25 m

(82 feet)

NOTICE

The 'Distance 4' is always set when
the system is used for the first time
after starting the engine.

In ASCC mode

Except ASCC mode

• The vehicle will maintain the set speed, when the lane ahead is clear.
• The vehicle will slow down or speed up within selected speed to maintain

the selected distance, when there is a vehicle ahead of you in the lane. (A
vehicle will appear in front of your vehicle in the LCD display only when
there is an actual vehicle in front of you) 

• If the vehicle ahead speeds up, your vehicle will travel at a steady cruising

speed after accelerating to the selected speed.

Distance 4

Distance 3

Distance 2

Distance 1

Distance 4

Distance 3

Distance 2

Distance 1

OVG053315N/OVG053316N

Summary of Contents for 2016 Cadenza




































































































































































































































































































































































































































Reviews: