T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
5
6.
When storing the machine you can wrap the power cable around the groove of hook (as shown in image
1
).
Then twist the hook 90 degrees to keep the power cable in place (as shown in image 2).
7.
Connect the power cable from the back of the vacuum head into the socket on the detergent pump cover.
Connect the power cable from the detergent pump cover into a mains socket. Press the power switch at the
front of the vacuum head to start the vacuum motor. Switch on pump 1 or pump 2 or both for the detergent
pumps.
Vacuum Switch
Vacuum Head Socket
Pump 1
Pump 2
8.
The air adjustor allows adjustment of airflow according to the different needs of suction volume. When you
adjust the knob to the left side you reduce the airflow, adjust the knob clockwise to increase the airflow. You
can also adjust the airflow via the slider on the trigger handle, with the slider open airflow is reduced.
Reduce Airflow
Increase Airflow
Airflow Slider
