3
CARRYING THE MACHINE
Detach the hose and wand from machine before carrying. Please ensure that all components, tanks
and removable parts are securely fastened, and that the supply cable and plug are coiled up, and not
trailing.
All liquid should be removed from the machine before lifting.
Take extreme care when moving the machine up or down steps or stairs.
CAUTION
– Incorrect lifting techniques may result in personal injury. We advise that the manual handling
regulations are followed.
ELECTRICAL SAFETY
Before connecting the machine to the power supply, refer to the specification label to ensure that your
supply voltage is correct for this particular model.
The supply cable is fitted with a non rewireable plug containing a 13 amp fuse. Should the fuse
require replacement it must only be replaced by a 13 amp fuse conforming to BS1362, and the fuse
cover must be refitted. If the fuse cover is lost, the plug must not be used until the correct replacement
cover is fitted.
IMPORTANT
If the supply cable is damaged, it must only be replaced by a special cable available from the manufacturer or
an authorised service agent. Should an extension lead be used, ensure cable rating is adequate for the
equipment. Do not use an extension lead in coiled condition as this could result in overheating of the cable,
and damage to the motor.
