background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equipmart Ltd

Kiam House

Birchill Road

Knowsley Ind. Park North

Merseyside

L33 7TD

United Kingdom

T: 0044 151 548 5500

F: 0044 151 548 5599

© Equipmart Ltd

www.kiamproducts.co.uk

Kiam

Power Products

Instructions Manual

Read instructions manual before use!

KV30B

WET & DRY VACUUM CLEANER

WITH BLOWER FUNCTION

6. Maintenance

1. Cleaning the Tank

After use or when the tank is full of dust (which is accompanied by a 

noticeable loss of suction), the tank must be emptied.

a) Unfasten the locking latch and remove the vacuum head.

b) Remove the filter and clean out the dust from the tank.

c) Replace the filter and vacuum head, and fasten the locking latch.

2. Cleaning the Filter

a) Remove the filter.

b) Gently wash in clean warm water.

c) Allow to dry completely before refitting.

7. Technical

Model

Power

Voltage

Frequency

KV30B

1400W

220v - 240v

50Hz / 60Hz

8. Help

Call Kiam Power Products on 0151 548 5500 for technical assistance 

or visit our website www.kiamproducts.co.uk

T: 0044 151 548 5500

F: 0044 151 548 5599

© Equipmart Ltd

www.kiamproducts.co.uk

Summary of Contents for KV30B

Page 1: ...ble loss of suction the tank must be emptied a Unfasten the locking latch and remove the vacuum head b Remove the filter and clean out the dust from the tank c Replace the filter and vacuum head and fasten the locking latch 2 Cleaning the Filter a Remove the filter b Gently wash in clean warm water c Allow to dry completely before refitting 7 Technical Model Power Voltage Frequency KV30B 1400W 220...

Page 2: ...safety functions 1 2 3 When the tank is full the vacuum will lose suction and emit a noise to indicate the motor is under strain Turn off and unplug the vacuum cleaner immediately then empty the tank and reassemble according to instructions Should the vacuum cleaner be turned on its side immediately turn the machine off Right the vacuum cleaner then turn it on again If the vacuum cleaner loses suc...

Page 3: ... on the hose connector and pull the connector out To use the blowing function insert the hose connector into the blower outlet make sure it is securely fastened Connect all accessories as pictured below Dust brush for bookshelves windows tables etc Wide floor brush for hard surface carpet etc Crevice nozzle for crevices corners etc Blower outlet for blowing dust away Accessories T 0044 151 548 550...

Page 4: ...e water goes into and damages the motor T 0044 151 548 5500 F 0044 151 548 5599 Equipmart Ltd www kiamproducts co uk Warning If water is emitted from the blower outlet do not overturn the machine when repairing as water may get into and damage the motor Turn off the machine and remove the plug each time after using or when carrying out maintenance Keep the machine away from strong sunlight and hig...

Reviews: