T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
1. Product Features
1) Vacuum cleaner for wet and dry applications.
2) Storage points on the base for easy access to accessories.
3) Hose outlet for blowing function.
2. Part Names
1) Insert the plug into the power supply socket (240 volt).
2) Press the switch to the on position to start the vacuum motor.
3) Adjust the airflow by pushing the sliding block foward / backword.
5. Protective Safety Functions
The KV30B is equipped with several protective safety functions.
1)
2)
3)
When the tank is full, the vacuum will lose suction and emit a noise
to indicate the motor is under strain. Turn off and unplug the
vacuum cleaner immediately, then empty the tank and reassemble
according to instructions.
Should the vacuum cleaner be turned on its side, immediately turn
the machine off. Right the vacuum cleaner, then turn it on again.
If the vacuum cleaner loses suction or emits sounds, turn it off and
empty the tank before continuing to use. Also check for any
blockages in the hose and tubes.
I = On
O = Off
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
Blower Outlet
Top Cover
Locking Latch
Steel Tank
Trolley Base
Castor Wheel
Air Inlet
Switch
Handle
