- 5 -
Ⅴ.
Operation Method
1. Please install the two castors and two wheels to the base of the machine.
Check that the electrical switch is switched off (in position 0).
Then insert the hose short connector into the swivel of the vacuum cleaner with
a twisting force.
2.
Then connect the tube (metal tube or plastic tube)
with the hose connector, twist the tubes in order to
ensure that they are properly fitted.
3.
Attach suitable nozzle to the tube.
Choose nozzle depending on what type of material
that is to be picked-up.
4
．
For KVH-15,Before picking up dry, please make sure the install dust bag
according to picture:
Inset the hole in the bag in the appropriate housing on
the machine as shown in the picture.
5.
STARTING AND STOPPING
Warning! The power supply voltage must correspond to that indicated on
the Technical data label. Machines indicating 230V also operate on
220V power Supply.
Starting: Flick the on/off switch to position I.
Stopping: Flick the on/off switch to position 0.
6.
You can adjust the airflow by push the sliding
block up and down.
