- 7 -
by the float.
Switch off the vacuum cleaner immediately and disconnect the plug from the power supply.
Open the vacuum cleaner and empty it.
Before starting to vacuum again, dry the filter and the tank.
Before storing the machine, in order to prevent mould forming, it’s necessary to remove and dry
the filter.
MAINTENANCE AND CLEANING
WARNING! Before any control and maintenance, always disconnect the machine from the
power supply by unplugging it.
Clean and maintain your machine regularly, to ensure that it remains perfectly efficient and has a
long working life.
Clean the machine with a soft brush or cloth.
Do not wet or spray water over the tool.
Do not use any detergents or solvents as these may damage the machine beyond repair.
Chemical agents easily damage the plastic parts.
Clean and empty the collection box regularly.
Clean and dry the filter.
TROUBLE SHOOTING
If the machine fails to start:
-make sure that the start switch is in position
Ⅰ
-check the electrical connections
-check the extension lead or change the power supply socket
-check the mains switch in your home
If the machine does not vacuum:
-make sure that the container is not full and empty it if necessary
-clean the filter bag
-make sure that the vacuum hose is not blocked. Unblock it if necessary
-make sure that the float has not triggered
WARNING! If the machine still fails to work correctly after you have carried out the above
operations, or in the event of anomalies other than those described above, take it to an
authorized assistance centre.
Always provide the machine model and serial number shown on the technical data label and
the enclosed sheet.
